2014 TRIUMPH DAYTONA 675 ABS



2014 Triumph Daytona 675 ABS SpecificationsThe Triumph Daytona 675 ABS is a motor sport that was created with sporty performances and aggressive. The motorcycle is propelled by a fresh 675 cc, liquid-cooled, 12 valve, DOHC, in-line 3-cylinder engine which features twin injectors per cylinder, titanium valves and a 14,400 red line. The motorcycle’s engine generates a maximum power of 128 PS at 12500 rpm and 74 Nm of torque at 11900 rpm. All this power is kept under control by a six speed transmission with wet, multi-plate, slipper clutch.

Overview


Apex after apex the new Daytona 675 inspires complete confidence. More power, lighter weight, and easier to ride, Triumph engineers ambition was simple: to create the most perfectly balanced motorcycle. An equal blend of torque, responsiveness, agility, poise and purpose. The result is a bike with class-defining power, performance and handling. A bike that will inspire total confidence. And looks every bit as good.

The engine is brand new featuring twin injectors per cylinder, titanium valves, a 14,400 red line, and a spine tingling induction roar. It’s faster on the track, better on the road and even more satisfying to own.

Engine
Internals (injectors, valves)
With twin injectors per cylinder the new Daytona can draw more fuel quicker when you open the throttle fully and demand more from the engine.
A first for a production Triumph, Triumph have now fitted substantially lighter titanium valves to cope better with the higher revs. This also means lighter valve springs can be used, reducing valve train wear and friction.
Triumph also knew that the weight reduction was enough to give us the space to add some metal to the valves without compromising the valve train, so the top of the valve ’mushroom’ heads were reshaped to improve gas flow around the valve and into the combustion chamber. This means better efficiency and a boost in torque at low and medium revs.

Performance
Triumph built the new Daytona engine with a shorter stroke allowing us to set a 500rpm higher rev ceiling at 14,400 and Triumph increased power to 128PS and maximum torque to 75Nm. The cylinder block is now cast separately from the upper crankcase to cope with higher pressures, more torque and more power.
So the new engine now gives you higher power for longer. Bringing even more performance out of the bike as well as bringing more of the rider out of you

Sound
Triumph enlarged the through-airflow headstock so that the intake mouth is positioned in the highest pressure zone centrally at the front of the bike. Improving flow efficiency, so that air passes in a straight line through the centre of the headstock to the airbox.
And when the air passes through the centre of the cockpit zone, it gives you even more of that distinctive three-cylinder intake snarl. And it’s not just the volume of the sound that’s better, it’s now there over a much wider range of revs for an even more focussed, involving ride than ever before.

Chassis

Suspension
Front and rear KYB suspension is, of course, fully adjustable. Both front and rear suspension have the added advantage of separate low- and high-speed compression damping adjustment, making the Daytona as forgiving on the road as it is focused on the track.

Wheels and Tyres
Something as simple as reducing the weight of the wheels can have a dramatic effect on handling. Lighter wheels reduce unsprung mass and minimize the gyroscopic effect of a spinning wheel. This makes it easier to turn the bike in and hold a line through the corner. Triumph has put race-derived Pirelli SuperCorsa tyres on to give you the grip to match the potential lean angles.

Front Forks
The new Daytona 675 is fitted with new, state-of-the-art KYB centre-fixed cartridge forks that use an internal damping cartridge which is rigidly located at both ends, rather than floating at one end as in conventional designs. Because it’s supported by thinner walls, it has more room for the damping piston, so a larger diameter one can be used, improving damping accuracy.

Mass Centralisation
By relocating the silencer to under the engine, rapid direction changes are now more fluid and more controlled. Rider input is rewarded with an incredibly controlled response.
Concentrating as much of the mass of the bike at the centre has increased the Daytona 675’s agility and grip, so you can achieve higher lean angles through the corners. And you’ll find that the bike now responds even more readily to your input through the handlebars.

Frame
The new Daytona 675 frame is made from eight castings. That means fewer welds and a lighter construction with no loss of strength or stiffness for a more focussed ride.
Triumph sharpened the geometry with a change in the rake from 23.9° to 22.9° and a reduction in trail from 89.1mm to 87.2mm. And now, the swingarm pivot position is adjustable so you can tailor the handling more precisely to your riding style and the conditions.

Swingarm
The 2013 Daytona’s new rigid aluminium swingarm is designed asymmetrically to make room for the improved exhaust system.You can still adjust its pivot and personalise the bike’s geometry, fine-tuning it to suit your riding style and conditions.

Brakes
Nissin radial callipers on the front, give amazing stopping power and confidence-inspiring feel through the lever. The rear Brembo caliper is lighter than before, helping to reduce the unsprung mass, which further improves handling and agility.

Riding Position
Triumph has improved the riding position by raising the bars slightly and included a 10mm reduction in seat height. Still a focussed supersport riding stance designed to get the best out of you in track conditions.

Equipment and Technology
Switchable ABS
Triumph new ABS system is switchable and includes a track mode with very late intervention, minimised rear wheel lift control and the facility to slide the rear wheel on the entry to corners.
Off the track it’s useful for preventing wheel lock-up when hitting a wet patch or after misjudging a corner when braking on a slippery surface such as grass.

Slip-Assist Clutch
The addition of a slip-assist clutch means hard downshifting won’t result in a rear-wheel lock-up. It also serves to make the clutch lever action much lighter and smoother.

Instruments-Computer
Instruments feature a lap timer, two trip computers, gear change indicators, shift lights, clock, and can be configured to show tyre pressures (where optional Tyre Pressure Monitoring System is fitted) and ABS switching. So you know more of what’s going on as you ride.

Programmable Rev Lights
Programmable gear change indicators let you manually set up where in the rev range you want the lights to come on and prompt a gear change.

Removable Number Plate and Indicators
You can remove the already slender number plate and rear indicator mounting quickly for track day use.

Optional TPMS
With a bike a finely tuned as the Daytona 675, a change in tyre pressure can alter handling. Triumph Tyre Pressure Monitoring System will let you know any change in pressure, on the track or on the road, before it becomes an issue.

Immobiliser
To protect your Daytona from the wrong kind of attention, Triumph has added a high technology security system. It detects a microchip in the key body and if it’s not present the ignition system is disabled.
This prevents a copy of the correct key being used to switch the bike on.

Warranty and Service


Overview
Triumph confidence provides you with a two-year unlimited mileage warranty on your new Triumph and Genuine Accessories. Alongside the knowledge that Triumph give you a 12 month unlimited mileage warranty on replacement parts.
The Daytona 675 carries 6,000 mile (10,000km) service intervals.

2014 Triumph Daytona 675 Specifications
Engine type Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
capacity 675cc
bore 76mm
stroke 49.6mm
Fuel System Multipoint sequential electronic fuel injection with SAI
Exhaust Stainless steel 3 into 1 exhaust system low single-sided stainless steel silencer
Final drive O ring chain
Clutch Wet, multi-plate, slipper
Gearbox 6-speed, close-ratio
Oil capacity 1US Gallon
Front Frame - Aluminium beam twin spar. Rear - 2 piece high pressure die cast
Braced swingarm, twin-sided, aluminum alloy with adjustable pivot position
Wheels Front Cast aluminum alloy 5-spoke 17 x 3.5in
Rear Wheels Cast aluminum alloy 5-spoke 17 x 5.5in
Front Tires 120/70 ZR 17
Rear Tires 180/55 ZR 17
Front Suspension 41mm upside down forks KYB with adjustable preload, rebound and compression damping, 115mm travel
Rear Suspension KYB monoshock with piggy back reservoir adjustable for rebound and compression damping, 135mm rear wheel travel
Brakes Twin 308mm floating front discs. Nissin 4-piston radial calipers. (Switchable ABS models available)
Single 220mm rear disc brakes, Brembo single piston caliper. (Switchable ABS models available)
Length 2045mm
Width handlebars 695
Height without mirrors 1112mm
Seat height 820mm
wheelbase 1375mm
Rake 22.9ยบ
Trail 87.2mm
4.6us gallon tank capacity
Wet weight 184 pounds
Ec 128PS max power @ 12500
Max torque 74NM ec @ 11900
Fuel consumption urban 46.23mpg
Fuel consumption 56mph / 90kph 68.36mpg
Fuel consumption 75mph / 120kph 52.38mpg
Color Options : Crystal White / Sapphire Blue, Diablo Red / Jet Black
Crystal White / Sapphire Blue
Crystal White / Sapphire BlueDiablo Red / Jet Black, Phantom Black / Graphite
Price $ 11.599

Related Posts: